台式管子切割坡口机

Model specifications： 

XZT-6/12/18/28/36 ，XZT-12B/18B/28B/36B,XZT-6Ⅱ/12Ⅱ/18Ⅱ/28Ⅱ/36Ⅱ，XZT-12B

Ⅱ/18BⅡ/28BⅡ/36BⅡ,订制Φ□□□-□□□□mm

Equipment usage:
The pipe cutting machine adopts a mechanical ratchet feed, which is easy and convenient to operate; Can be used for standard groove processing of pipeline end faces, as well as for cutting and groove processing at any position in the middle of the pipeline; Type II equipment can simultaneously complete cutting and double-sided groove forming in one go.
Equipment principle:
Adopting pipe clamping without movement, rotating cutter head, and mechanical ratchet feeding; During processing, a circular multi-point self centering clamping method is used to clamp the pipe. The cutterhead rotates along the outer diameter of the pipe and advances inward layer by layer until the processing is completed. After processing, the pipe does not deform, and the straight or beveled surface is smooth
Good perpendicularity of the end face can be directly used for welding.
Processing capability:
Single cutting and single groove completion with a single feed; The Type II pipe cutting machine adopts double-sided multi claw self centering clamping, and completes cutting with a single feed and two grooves.
Characteristics of desktop pipe cutting and beveling machine:
1. It can be used for groove processing of pipeline ports, and can also cut grooves at any position in the middle of the pipeline.
2. The cutting groove is free of burrs and deformation, and can be directly welded.
3. Rotary cold cutting, the rotating blade cuts along the periphery of the pipeline, with good cutting effect.
4. Use multi-point self centering circumferential clamping to ensure safe and secure cutting.
5. The main body of the pipe cutting machine can be raised and lowered, making it easy and convenient to operate.
Ordering Notice:
1. The cold standard configuration of the machine does not have a cutting fluid circulation system. If you need a cutting fluid circulation system, please specify it before ordering
2. The cold standard configuration of the machine does not have a variable frequency speed control system for the cutterhead. If you need a variable frequency speed control system for the cutterhead, please specify before ordering
3. The machine cold standard does not have an electric clamping device. If an electric clamping device is required, please specify before ordering
4. The machine cold standard does not have a conveyor roller (separate input and output). If you need a conveyor roller (separate input and output), please specify before ordering